Presspull command

Presspull can be used to apply height to any face of existing geometry or an island in 2D geometry. This tool can also be used to subtract part of a geometry. You can start the Presspull tool by PRES command or by using the CTRL+Shift+E key from your keyboard.

Start the command and select the island from the geometry which you want to extrude, you can also click on object boundary to extrude the complete 2D geometry ignoring island. If you select an open profile for Presspull then a surface will be created along the boundary similar to the extrude command.

You can click on the planar face or closed areas of existing 3D solids to create holes or pockets and 3D solid extrusions.

Making Presspull along direction:

If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.